Video Library

Luxury Vinyl and Floating Floors: Understanding Best Practices

with Graeme Rosen, Technical Sales Representative, Inter Source Trading Company

EDUCATION WEEK EXPRESS – How to Obtain and Interpret Meaningful Data when Moisture Testing for Commercial Flooring

with Andrew Rynhart, CEO, TRAMEX

EDUCATION WEEK EXPRESS – Asbestos and Lead Awareness

with Adrian Lee, BEng, AScT Principal and Founder, EPOCH Environmental Consulting

EDUCATION WEEK EXPRESS – A Greener Approach to Flooring Selection for Interior Designers/Architects

with Sharon Hollingsworth, Principal, RID Registered Interior Designer, IDIBC, ART, WELL AP, LEED AP BD+C, BCIT, Husk Interior Design

EDUCATION WEEK EXPRESS – Sustainability: Seeing through the Greenwashing

with Beth Doehner, Sustainability Manager, Tarkett

EDUCATION WEEK EXPRESS – Ceramic Tile & Stone Installations: Do’s and Don’ts and Industry Resources

with Brent Johnsen, Business Development Manager, MAPEI

EDUCATION WEEK EXPRESS -The Good, the Bad and the Ugly: A Spotlight on Flooring Inspections

with Drew Kern, Clayton Shull and Scott Vitus

EDUCATION WEEK EXPRESS – Moisture: The Why, What, and How of Concrete Moisture Testing

with Jason Spangler, Flooring Sales Manager, Wagner Meters

EDUCATION WEEK EXPRESS -Vinyl Plank Flooring in Multi-Family Developments: To Gap or not to Gap

with Tyler Yelland, VP of Sales & Marketing, Primco

EDUCATION WEEK EXPRESS – Efficiencies on the Job

with Don Brletic, President, Beatty Floors

EDUCATION WEEK EXPRESS -When a Flooring Project Goes South and QAP Guides it North – A Study in Turning Things Around

with Julian Forsythe, FCITS, CMTT, Certified Flooring Inspector and Installation Specialist

Winning the Struggle Between Moisture & Flooring Installations

with Will White, Director of Technical Communications and Training, CUSTOM Building Products

Division 3 versus Division 9: A Case Study

with Aaron Abbott, Senior Technical Product Manager,

LATICRETE International, Inc.

Carpet: Still the Leader and Still Evolving – What you need to know now and into the future

with Russell Cleveland, Quality Director, North America, Milliken & Company, Floor Covering Division

Myth-Busting Commercial Rubber Flooring

with Tom Spencer, Key Account Director, Canada, Interface

AN INTRODUCTION TO CONTRACT SURETY BONDING

with Tyler Stothart, Senior VP of Surety, Wilson M. Beck

Understanding Acoustics: Part 1

with Andre Rioux, Co-owner/Business Development,

AcoustiTECH, a division of FINITEC Group

Solving Acoustical Problems: Part 2

with Andre Rioux, Co-owner/Business Development,

AcoustiTECH, a division of FINITEC Group

The Why and How of Testing New and Old Concrete Slabs

with Andrew Rynhart, CEO Tramex Meters

Successful LVT/LVP Installations – Here’s what it Takes

with Tim Craik, General Manager and Ryan McGregor, Regional Sales Manager, GO Resilient Canada

CONDENSATION AND DEWPOINT: ELIMINATE THESE TO ELIMINATE MOISTURE CLAIMS

with Robert Higgins, Product Development, Consultant

WET AREAS AND DRAINS: RECOMMENDED DETAILING FOR SHEET VINYL

with John Loupelle, Technical Services Representative, Altro

FIVE BASIC THINGS YOU NEED TO KNOW FOR SUCCESSFUL HARDWOOD FLOORING INSTALLATIONS

with Drew Kern, Hard Surface Flooring Specialist

POST INSTALLATION CARE AND CLEANING; JUSTIFYING MINIMUM STANDARDS

with Bill Luallen, National Sales Director, XL North Floor Care and Surface Prep

THE UPS AND DOWNS OF THE STRAIGHTEDGE TEST: A DISCUSSION ON A CONTENTIOUS TOPIC

with Chris Maskell, NFCA; Seth Pevarnik, Ardex; Keith Robinson, DIALOG and Graeme Rosen, Inter Source

EFFECTIVE HABITS FOR SUCCESSFUL LVT INSTALLATION

with Tim Craik, General Manager, Go Resilient Canada

WHAT IT TAKES TO PROVIDE A SUCCESSFUL GYPSUM SUBSTRATE

with Dave Hamilton, Technical Sales Manager, Canada, Uzin-Utz North America Inc.

UPDATING CONCRETE STANDARDS IN CANADA TO AVOID SLAB REJECTION: A CONVERSATION

with Lloyd Keller, Construction Sciences, Ellisdon

ADHESIVES: PROBLEMS, CURES, TESTS AND LIMITATIONS

with Brent Johnsen, Business Development Manager, MAPEI

INTERIOR DESIGNERS AND SUPPLIERS: WORKING TOGETHER FOR A COMMON GOAL

with Karl Travis, Partner, Hager Design International Inc.

BRIDGING THE GAP BETWEEN DIVISION 3 & DIVISION 9 WITH SPECS Part 1: A NEW PERSPECTIVE

with Keith Robinson, FCSC FCSI RSW, Research and Development, Specifications, DIALOG

BRIDGING THE GAP BETWEEN DIVISION 3 & DIVISION 9 WITH SPECS Part 2: THE SPEC IN ACTION – A WALK-THROUGH AND CASE STUDY

with Keith Robinson, FCSC FCSI RSW, Research and Development, Specifications, DIALOG

FLOOR COVERING INSPECTIONS: HOW THE QUALITY ASSURANCE PROGRAM HELPS ENSURE A PROJECT’S SUCCESS

with Chris Maskell, CEO, NFCA

Underlayment Series – Part 1: Proper Substrate Prep for Installation of Patching and Levelling Materials

with Seth Pevarnik, Director of Technical Services, Ardex Americas

Underlayment Series – Part 2:
Thick Pour Gypsum Underlayments

with Seth Pevarnik, Director of Technical Services, Ardex Americas

Underlayment Series – Part 3: Wooden Subfloors and Finish Grade Panel Underlayment for Installation of Flooring

with Seth Pevarnik, Director of Technical Services, Ardex Americas

The Love-Hate Relationship between Moisture and Concrete Slabs

with Peter Craig, FACI, FICRI, CCSMTT, Concrete Floor Specialist, Concrete Constructives

The Art of Flash Coving

with Tim Provence, Installation Specialist, Armstrong Flooring